Make a Toe Cap
Making a Toe Cap
-
-
Step 1:
Climbers and hikers create tough toe caps with Freesole to protect boots from sharp rocks and crampons.
Start with a clean, dry boot. Stuff newspaper tightly inside the boot toe area. Apply tape tightly across toe to create straight edge. Lightly sand the toe area with sandpaper, then buff aggressively with a rag dipped in rubbing alcohol. Allow to dry and buff a second time with rubbing alcohol.
-
Step 2:
Paint the surface with Freesole. Be sure to cover all areas between the sole and the tape. Freesole will self level and become smooth.
-
Step 3:
Wait 45 minutes, then peel off tape. Do not leave tape on longer! Allow your new toe cap to cure completely overnight.
Find more great tips like these in our Repair Guide
-
Wash dry tops, dry suits and wetsuits in McNett® Wet Suit and Dry Suit Shampoo. To eliminate the toughest odors dip suits in MiraZyme™ treated water (and air dry (see instructions on the bottom of page 20). MiraZyme is a powerful blend of odor fighting microbes & enzymes.
-
Washing a down sleeping bag usually restores its loft (thickness and warmth). The effect is often dramatic. Don’t be afraid to wash your down gear! Down is tough!
Down sleeping bags should be washed when dirt and grime begin to interfere with loft (every 20 nights of use). This is also a good rule for synthetic sleeping bags. In general: if it’s dirty, losing loft or smells – wash it!