McNETT® - Essentials for AdventureTM

Weatherproofing

  • Which Water Repellent is Best for You?

    • Choose ReviveX to Provide Water Repellency

      Choose the Right Formula

      • Lightweight hiking boots are generally made with nubuck, suede, nylon or Gore-Tex® fabric. Weatherproofing: Use ReviveX® Nubuck, Suede & Fabric Spray Water Repellent


      • Mid-weight hiking & backpacking boots are generally made with full-grain leather for added support and durability. Many feature Gore-Tex® fabric for added comfort. Weatherproofing: Use ReviveX Leather Spray Water Repellent


      • Mountaineering boots are built with the roughest terrain and wettest conditions in mind. These boots may use full-grain leather and often include Gore-Tex® fabric for maximum dryness. Weatherproofing: Use ReviveX Leather Gel Water Repellent

  • Restore or Create Water Repellency for Footwear

    • Bookmark and Share
    • Use ReviveX to Provide Water Repellency

      Step 1:

      Remove laces. Eliminate dirt and trail hardened grime with ReviveX® Boot Cleaner and air dry.

    • Use ReviveX to Provide Water Repellency

      Step 2:

      Apply ReviveX® Nubuck, Suede and Fabric Water Repellent to clean, dry footwear. Liberally treat the tops and sides of the toe area, especially where the boot bends.

    • Use ReviveX to Provide Water Repellency

      For Heavy-Duty or Rough-Out Leather Boots

      To prepare footwear for the wettest, most abrasive situations such as step kicking in snow, ice climbing or mixed climbing, use a heavy duty gel waterproofing formula such as ReviveX® Leather Gel. Apply gel to a clean cloth, then buff into the leather.

    • Use ReviveX to Provide Water Repellency

      NOTE:

      Gel water repellent treatments will darken leather, giving footwear a rich, traditional outdoor look. Many climbers like this darker look. Make sure you like it before you apply ReviveX Leather Gel.

Find more great tips like these in our Repair Guide

  • Re-Bonding Boot Rands

    Re-Bonding Boot Rands

    Use Freesole to permanently re-bond a peeling boot rand. First remove dirt, then clean the bonding area with Cotol-240™ (best) or rubbing alcohol and a stiff brush. Apply Freesole in the gap. Tape or clamp firmly in place and dry overnight. When taping, insert a pen to apply pressure directly on the rand.
  • Boot Lacing Tip

    Boot Lacing Tip

    Relieve pressure and give your boots a custom fit with these lacing tricks. 1. Use “Skip Lacing” to take pressure off sensitive areas 2. Use the “Double Wrap” to have different levels of tightness on upper and lower sections of the boot.