From the top of the ridge you can see your car at the trailhead far below. Do you take a compass bearing and try to hold to it as you scramble down through dense forest? If you drift off your bearing, even slightly, you could miss the trailhead and wind up lost in the forest. By “Aiming Off” you could deliberately choose to take a bearing that will intersect the road then walk to the trailhead and your car.
Find more great tips like these in our Repair Guide
Urethane-based adhesives are the best for achieving maximum strength and durability. When your goal is a permanent bond, choose Aquaseal® Repair Adhesive & Sealant – it’s the industry standard for high strength, absolutely permanent repairs to all
kinds of dive gear including wet suits, dry suits,
gloves, boots, gear bags and more. Aquaseal
cures to full strength overnight or in 2 hours with
Cotol-240™ Cure Accelerator & Pre-Cleaner.
Relieve pressure and give your boots a custom fit with these lacing tricks. 1. Use “Skip Lacing” to take pressure off sensitive areas 2. Use the “Double Wrap” to have different levels of tightness on upper and lower sections of the boot.