How to Thread A Needle
more tips
-
-
Step 1:
Cut the end of the thread at a 45 degree angle. Stiffen the thread with saliva or bees wax. It will be easier to control through the eye than a limp thread. Hold up the needle so the eye of the needle is open toward you. If you are unable to see the eye of the needle, place a contrasting color behind the needle.
-
Step 2:
Slip the thread into the needle and pull the thread until ends are even. Knot the ends of the thread together (see Knotting The Thread). Straighten the threads and begin sewing. Pull the thread after each stitch to prevent the thread knots.
Find more great tips like these in our Repair Guide
-
All rainwear is
factory treated
on the outside
with a special water
repellent spray called DWR (for “Durable Water Repellent”). Over time that treatment wears off causing fabrics to “wet out” – which reduces breathability and creates excess condensation, making you damp and cold. ReviveX water repellents are unique because they bond to both the fabric and any remaining factory DWR creating the most durable water repellent finish available.
-
Potato Chips can make great firestarters!