Re-Bonding Boot Rands
-
-
Step 1:
Use Freesole to permanently re-bond a peeling boot rand. First remove dirt, then clean the bonding area with Cotol-240™ (best) or rubbing alcohol and a stiff brush. Apply Freesole in the gap. Tape or clamp firmly in place and dry overnight. When taping, insert a pen to apply pressure directly on the rand.
Find more great tips like these in our Repair Guide
-
Urethane-based adhesives are the best for achieving maximum strength and durability. When your goal is a permanent bond, choose Aquaseal® Repair Adhesive & Sealant – it’s the industry standard for high strength, absolutely permanent repairs to all
kinds of dive gear including wet suits, dry suits,
gloves, boots, gear bags and more. Aquaseal
cures to full strength overnight or in 2 hours with
Cotol-240™ Cure Accelerator & Pre-Cleaner.
-
Put your jacket into your sleeping bag’s stuff sack for an instant pillow.