McNETT® - Essentials for AdventureTM

Re-Coat Tent Floors

  • Bookmark and Share
  • Re Coat Tent Floors

    Step 1:

    Re-coat worn areas on your tent floor with Tent Sure™ Tent Floor Sealant. Apply to the coated side of the fabric (the inside) using a foam paintbrush. For best results apply Tent Sure in a thin film, using even, sweeping motions to avoid puddles. A single thin coat works best.

Find more great tips like these in our Repair Guide

  • Backpacking Tip

    Backpacking Tip

    Steps to Lifting a Backpack 1. Lift to bent knee. 2. Slide onto one shoulder while swinging slowly around and slide other arm in opposite strap. 3. Fasten hip belt, then snug up other straps and off you go...!